TECHNICAL DATA SHEET FOR SHREECRYL PF-45 (Water Based)

For ACRYLIC COPOLYMER FOR PROTECTION FILM MANUFACTURE

PHYSICAL APPEARANCE
Bluish white copolymer free flowing emulsion.
CHEMICAL NATURE
PF-45 is an Acrylic copolymer dispersion suitably modified with dispersing agents, tackfiers, buffers to retain long shelf life, permanent, nontransferable low tack etc.
NON - VOLATILES
53 - 54 %
pH VALUE
4 - 6
ACID VALUE
1 - 3 mgm of KOH/gram of substance.
COLLOIDS / STABILISER
Cellulose derivative and special quality polyvinyl alcohol and various surfactants.
PARTICLE SIZE
0.5 - 1 microns, very fine size.
VISCOSITY BY BROOKFIELD : 100 CPS 300 CPS (1 3 poises) VISCOMETER, RVT MODEL, SPINDLE 1/2 AT 20 RPM AND 30o C
100 CPS 300 CPS (1 3 poises)
PEEL VALUE AT 4-5 gsm, cured at 110o C for 4 mts.
100 - 125 gms per inch.
SHEAR VALUE AT 4-5 gsm coating & cured at 110O C for 4 mts, with a load of 0.5 kg
90 to 100 hours
Drying Rate
Moderate to allow medium speed roller application on treated poly film at 3-5 gsm (dry coating)


COMPATIBILITY : Shreecryl PF-45 is compatibility with plasticisers like DBP, solutions of polyvinyl alcohol, surface-active agents, fungicides etc. It is compatible with water.

APPLICATION TECHNIQUES : Shreecryl PF-45 is applied by roller for protection film production. For specialized purposes, it can be spray coated too.

USE OF SHREECRYL PF-45

1) For mass production of protection film on treated polyfilm.
2) It can be used for low tack stickers on PET, PVC etc.

ADVANTAGES OF SHREECRYL PF-45

1) More coverage, low tack, no-transfer when peeled off.
2) Developed by professional Technocrat whose AIM is to on improving the quality to give satisfaction to the customers.
3) Unlike other grades which do not work well for roller application, PF-45 works extremely well.
4) PF-45 has long shelf life.
5) The PF-45 films are UV stable.

DO'S & DO NOT'S

1) Do not mix with any other brand of protection film products.
2) Do not unnecessary thin down with water.
3) Use clean rollers. After work, clean with water.
4) Keep the container containing PF-45 closed to avoid contamination and skinning.
5) Store the glue under normal temperatures.

PACKING SIZE: 200 kgs, 50kgs & 5kgs.

Note: The above data, suggestions and recommendations are given in good faith without any guarantee whatsoever.

 
Site maintained and developed by Aniktantra. Copyright 2003, All Rights Reserved